Pricing Guide
In short: custom zinc alloy medals with standard plating and poly bag packing run about $1.80–$3.50 per piece at 100–299 pieces, $1.20–$2.20 at 300–999, and $0.60–$1.50 at 1,000+. That figure **includes the mold and the digital proof**, on the basis set out below the table: one design, one size, standard 2D relief, standard plating and poly bag packing. Freight is quoted separately.
How Much Do Custom Medals, Coins, Pins & Keychains Cost?
Pricing for custom metal products depends on several factors including material, size, quantity, process, plating, color, and packaging. At Sinoawards, we offer factory-direct pricing that is typically 30–50% lower than domestic suppliers because you are buying directly from the manufacturer in China.
The table below shows typical price ranges for common product categories. These are estimates only. Contact us for an exact quote based on your specific design and quantity.
Typical Price Ranges (USD)
| Product | Quantity | Price Range per Piece |
|---|---|---|
| Custom medals | 100–299 | $1.80 – $3.50 |
| 300–999 | $1.20 – $2.20 | |
| 1,000+ | $0.60 – $1.50 | |
| Challenge coins | 100–299 | $2.50 – $4.50 |
| 300–999 | $1.80 – $3.00 | |
| 1,000+ | $1.00 – $2.00 | |
| Lapel pins | 100–299 | $1.50 – $3.00 |
| 300–999 | $0.90 – $1.80 | |
| 1,000+ | $0.50 – $1.20 | |
| Metal keychains | 100–299 | $1.80 – $3.50 |
| 300–999 | $1.20 – $2.20 | |
| 1,000+ | $0.70 – $1.50 |
What each band assumes: one design, one size, standard 2D relief, standard plating, poly bag packing — and the mold for that design is already inside the per-piece figure, so a first order pays no separate tooling line. A project that goes beyond that basis (a special or oversized shape, 3D or multi-level relief, dual plating, several sizes for one design) needs more tooling, and that extra is quoted in USD on the quotation rather than estimated here.
Factors That Affect Price
Quantity
Higher quantities lower the per-piece figure: the band price already accounts for the tooling on a run of that size, and production efficiency improves as the run gets longer.
Size
Larger products use more metal and enamel, increasing material cost.
Material
Zinc alloy is most affordable. Brass, copper, and stainless steel cost more.
Process
Die-casting and 3D designs cost more than flat die-striking. Offset printing adds cost for full-color designs.
Plating & Finish
Standard gold, silver, and nickel are economical. Antique and dual-tone finishes may add cost.
Color
More enamel colors increase labor. Hard enamel is more expensive than soft enamel.
Packaging
Velvet pouches, gift boxes, and custom backing cards add cost compared to standard poly bags.
Shipping
Express courier is fastest but most expensive. Sea freight is economical for large orders.
Why the Same Medal Can Quote Three Times Apart
Two factories quoting "the same" medal at $0.90 and $2.70 are rarely describing the same object, and a quote is not one number but three. The unit price covers metal, plating, enamel and packing. The mold for one design, one size and standard 2D relief is inside the band price above. When a project needs more tooling than that — a special shape, 3D or multi-level relief, more than one size for the same design — the extra is a one-time charge stated in USD on the quotation. It is not repeated on a reorder of an unchanged design, and the tool is stored free for three years. Freight is a third figure that depends on weight, volume and speed.
Within the unit price, the spread usually comes from four decisions rather than from the supplier's margin:
- Diameter and thickness. A 2 inch medal at 3 mm and a 3 inch medal at 4 mm use very different amounts of metal; weight moves roughly with the square of the diameter and linearly with thickness.
- Metal. Zinc alloy is the economical default; brass, copper and stainless steel cost more.
- Process and relief. Die-cast 3D relief costs more than flat die-struck artwork, and every additional enamel color adds a fill step.
- Packing. Poly bag, velvet pouch and printed gift box are three different line items, and packing is often the quietest difference between two quotes.
So when comparing suppliers, ask for the same specification in writing — diameter, thickness, metal, plating, enamel type, ribbon and packing — plus how the tooling is charged and the freight terms. Anything less compares two different jobs.
What Is Included in Our Quote?
- design review and digital proof
- Mold making — one design, one size, standard 2D relief
- Production and quality control
- Standard packaging (poly bag)
- Export packing for safe transit
Additional Costs to Consider
- Extra tooling beyond one design, one size and standard 2D relief — quoted in USD on the quotation, not repeated on an unchanged reorder
- Custom packaging upgrades
- Express shipping or DDP delivery
- Import duties and taxes in your country
- Additional samples beyond the standard digital proof
Is There a Minimum Order Quantity?
Fully custom medals start at 100 pieces per design. The tooling and the setup work are the same whatever the run size, so the per-piece figure is high on a small run even though nothing extra is charged. The table above starts at 100 pieces for a different reason: that is roughly where per-piece pricing becomes efficient, not where a smaller order is refused.
This is also why "wholesale price" has no single answer. A wholesale figure is simply the per-piece price at your quantity band and specification, so a distributor reselling to several events, a race series ordering a season at once and a club reordering twenty medals are all quoted from the same table at different points.
If you are comparing our table against a domestic supplier, compare it against their price for the same diameter, thickness, metal, plating and packing, and add their mold and freight. The per-piece number on its own is the least informative figure in the comparison.
How to Get the Best Value
To get the lowest unit price, increase your order quantity, simplify the design, use zinc alloy, choose standard plating, and minimize the number of enamel colors. Our team can review your design and suggest cost-saving adjustments without sacrificing appearance.
Frequently Asked Questions
How much do custom medals cost?
Custom zinc alloy medals with standard plating and poly bag packaging run about $1.80 to $3.50 per piece at 100 to 299 pieces, $1.20 to $2.20 at 300 to 999, and $0.60 to $1.50 at 1,000 or more. Brass, copper, 3D relief, antique plating, extra enamel colors and upgraded packaging each move the piece price up.
Is there a minimum order quantity for custom medals?
Fully custom medals start at 100 pieces per design. The tooling and the setup work are the same whatever the run size, so the per-piece figure is high on a small run even though nothing extra is charged. The price table starts at 100 pieces because that is where per-piece pricing becomes efficient, not because a smaller run is refused.
What is included in the quoted price?
The quote covers the mold for one design and one size in standard 2D relief, the digital proof, production, quality control and standard poly bag packing. Freight, import duties, upgraded packaging and any samples beyond the standard proof are quoted separately.
Why is the price given as a range instead of one number?
Because the per-piece price depends on diameter, thickness, metal, plating, enamel type, ribbon and packaging, a single number would only be accurate for one exact specification. The range covers that spread at each quantity band; an exact price needs the artwork, the size and the quantity.
Why do two suppliers quote the same medal three times apart?
A quote is three parts: the unit price, the tooling and the freight. On the bands above, the tooling for one design and one size is already inside the unit price; on anything more complex it appears as its own line. Comparing only unit prices compares different molds, different thicknesses and different shipping terms. Ask for all three, and for the same specification, before treating the numbers as comparable.
Does the per-piece price fall at higher quantities?
Yes. The band price already accounts for the tooling on a run of that size, and production efficiency improves as the run gets longer. That is why the table has bands at 100, 300 and 1,000 pieces rather than a single rate.
Certificate 75326Q00013R000, issued by ZK Certification, valid to 24 March 2029.
See the certificate →Medals, coins, pins and keychains are listed by quantity on this site.
See the bands →Shipped from one factory in Dongguan, from die casting to packing.
About the factory →Get Your Exact Quote
Send your design, quantity, and specifications for a free, no-obligation factory quote.
Request Pricing How to OrderRelated Reading
- How much do custom medals cost? — a breakdown of the factors that move a custom medal quote.
- Wholesale custom medals — the trade side: bands by quantity tier, private-label packaging, mold storage and payment terms.