Why Use Zinc Alloy for Medals? Cost, Weight & Finish

Zinc alloy is the workhorse material behind most custom medals, challenge coins and badges. It costs less than brass or stainless steel, casts finer detail than iron, and takes plating, painting and enamel color cleanly — which is why it is the material we recommend for the majority of orders.

What Is Zinc Alloy?

Zinc alloy — also called pot metal or sculpting zinc — is a mix of zinc with smaller amounts of copper, aluminium and magnesium. The blend gives it corrosion resistance, strength and ductility, which is why it is used far beyond awards: architectural hardware, decorative trim, sculptures, power tools, machinery parts and even medical devices. Properties shift with the recipe, so the alloy we cast for medals is tuned for detail and finish rather than for structural load.

Why Zinc Alloy Is Used for Medals

Hardness and durability

Zinc alloy has high hardness for its weight, so medals stand up to handling, shipping and years of display better than softer metals. It is also lighter than brass, which keeps freight costs down on large event orders.

Price

Once a mold is cut it can be reused for years, and a volume order spreads that cost across more pieces. That is why zinc alloy sits above iron and copper on per-piece price but below stainless steel. The mix of metals in the alloy also moves the price, so the same design in a thinner section costs less.

Castability

Zinc alloy die casting reproduces fine relief, sharp lettering and 3D shapes that stamping cannot, and it holds thin sections with a smooth surface. Casting is not automatically perfect: a weak mold or a rushed pour leaves seams and rough patches, so our finishing team cleans and polishes each piece by hand before plating instead of trusting the machine output.

Surface finishing

Zinc alloy accepts digital printing, electroplating, soft enamel color filling, sandblasting and antiquing. In practice that means one base metal can become a shiny gold, antique brass, black nickel or full-color medal — and it is why zinc alloy is the default choice for medals that need both 3D relief and color.

The Advantages of Zinc Alloy Die Casting

  • High strength for the weight
  • Fully recyclable at end of life
  • Clean, sharp surface finish straight from the mold
  • Thin walls and fine detail are possible
  • Low raw material cost
  • Good electrical and thermal conductivity
  • Dimensionally stable and accurate

How Zinc Alloy Compares to Other Medal Metals

There is no single best material for medals, coins and pins — the right choice depends on your design, quantity, budget and deadline. The table below compares the metals we work with every day.

MaterialCharacteristicsBest for
Zinc alloyMost common; strong die-casting performance; cost-effectiveMedals, challenge coins, badges, 3D designs
BrassSofter, holds fine detail, premium feelBadges, high-end medals, pins
CopperTraditional base for hard enamel / cloisonnéPremium cloisonné pins and collectibles
IronEconomical, suited to stamping or simple castingHigh-volume basic products
Stainless steelCorrosion-resistant, clean premium lookDurable high-quality products
AluminiumLightweightLanyard parts and lightweight components
BronzeTraditional, collectible feelChallenge coins and commemorative pieces
PewterGood for spin casting and rich detailDelicate badges and specialty items

When zinc alloy is the right call

Choose zinc alloy when you want 3D relief, color and a controlled budget — which covers most sports medals, challenge coins and corporate awards. It is also the best value once you pass a few hundred pieces, because the mold cost is spread across the run.

When brass or copper is worth the extra spend

Brass is softer and reproduces very fine engraving and thin lines, so it suits high-end badges and pins where the detail is the whole point. Copper is the traditional base for true hard enamel (cloisonné) and is the material to specify when you need color that will not fade over decades.

When iron or stainless steel makes more sense

Iron is the cheapest option and works for high-volume, simple stamped items. Stainless steel costs more but resists corrosion and wear, so it is the choice for anything handled outdoors or daily.

Still deciding? Send us the design and the quantity — we will recommend a material and quote it both ways so you can compare like for like. Request a quote, or read how medals are produced, from mold to shipping.

Next: a price, a date, and a proof

Tell us the quantity, the size and the date you need it. You get a unit price with tooling listed separately, a production date, and a digital proof to approve before the tool is cut.