Custom Medal Ribbons

Satin, grosgrain and RPET ribbon in your colours — printed with the event, the distance and the sponsor, attached to the medal before it ships.

Minimum order No minimum A setup charge applies per design
Production time Confirmed at quote Quoted with the ribbon order
Unit price Quoted per piece Width, length and print method

Wholesale Custom Medal Neck Ribbons

A medal is only half a medal without its ribbon. The ribbon sets the color of the event, holds the medal at the right height on the chest, and takes the wear out of the piece — which is why it is specified with the medal rather than added afterwards. Sinoawards makes neck ribbons in satin, grosgrain and recycled PET (RPET) satin, 20 mm to 38 mm wide, printed by sublimation, woven as jacquard or screen printed, with the clip, ring or pin that matches the medal's top fitting.

Because the medals are cast and plated in the same factory, the ribbon is dyed to the same Pantone reference as the enamel, and the two arrive fitted and bagged together. No separate ribbon supplier, no color mismatch between the medal and the strap it hangs from.

navy satin medal neck ribbon folded into a V with a gold jacquard laurel repeat, attached to a blank polished gold medal eight satin medal ribbons fanned out as a pattern chart: gold pinstripe, white chevron, tartan, silver damask, polka dot, herringbone, topographic print and tonal marble close-up of four printed ribbon ends fitted with a snap clip, split ring, safety pin and bulldog clip sublimation printed medal ribbon with a full-coverage abstract topographic contour print in teal and orange bulk roll of green satin medal ribbon printed with a gold laurel and star repeat, beside a coiled length of the same printed ribbon three medal ribbons in 20 mm, 25 mm and 38 mm widths laid parallel in navy pinstripe, crimson chevron and green tartan

Key Features

  • Three fabrics

    satin, grosgrain and RPET satin, chosen for sheen, grip or recycled content

  • Three printing routes

    sublimation, woven jacquard and screen print

  • Pantone matched to the medal enamel, the bag print and the bib
  • Four attachments

    snap clip, split ring, safety pin, bulldog clip

  • Standard widths 20 mm, 25 mm and 38 mm, with custom cut lengths
  • Fitted to the medal and bagged in the same order, or supplied loose
  • RPET option for events with a sustainability requirement
  • Digital proof showing the print, color and finished drop

Ribbon Specifications

FabricPolyester satin, polyester grosgrain, RPET satin (recycled PET)
Widths20 mm, 25 mm, 38 mm; other widths on request
Finished length800 mm or 900 mm neck drop as standard; cut to the medal's size
PrintingSublimation print, woven jacquard, screen print
ColorDyed to Pantone; matched to the medal enamel and event colors
AttachmentSnap clip, split ring, safety pin, bulldog clip
EndsHeat cut and sealed, or folded and stitched
SupplyFitted to the medals, or loose with clips already stitched in
PackingBulk, or bagged per medal with the ribbon fitted
ShippingWorldwide by air express or sea freight; freight quoted with the order

Satin, Grosgrain and RPET

The fabric decides how the ribbon reads under light and how the print sits on it. Satin is the default for awards: it has a sheen that lifts the event colors and prints crisply. Grosgrain is ribbed, holds grip against a garment and is chosen when the ribbon should look more tailored. RPET satin is the recycled-content version of the standard satin and behaves the same way in print and in wear.

Satin

Smooth, glossy face with a matte reverse. The most common medal ribbon: it prints in full color, takes a crisp logo and lines up well with enamel colors on the medal.

Grosgrain

A fine horizontal rib that gives a flatter, more textile look. Popular for military-style and ceremonial awards, and for clubs that prefer a ribbon without sheen.

RPET satin

Satin woven from recycled PET. Same widths, same printing, same attachments — the difference is the yarn source, confirmed per order in writing on the quotation.

Woven jacquard

The logo is woven into the ribbon rather than printed on it. More durable and more textile in feel, and the right choice when the ribbon will be worn repeatedly rather than once.

Widths, Lengths and Attachments

Width is set by the medal, not by taste: a 50 mm medal looks under-dressed on a 20 mm ribbon and a 30 mm participation medal looks lost on 38 mm. The table pairs the standard widths and drops with what they are normally used for.

20 mm widthChildren's events, small medals, participation ribbons
25 mm widthMost finisher and sports medals; the default width
38 mm widthLarge medals, ceremonial and military-style awards
800 mm finishedStandard neck drop for a 50–60 mm medal
900 mm finishedLarger medals worn lower on the chest
Custom lengthSashes, multi-medal displays, bib and clip combinations

The attachment has to match the medal's top fitting, so it is decided with the medal drawing in front of both parties: a snap clip needs a loop at the top of the medal, a split ring needs a hole, a safety pin sits on a flat top plate. Getting this pair right at proof stage is what prevents a box of medals that cannot be hung. The ribbon is attached at the end of the medal production process, after plating and color filling.

Ribbon Attachments — How the Ribbon Meets the Medal

The attachment decides three things: how the medal hangs, whether the ribbon can be swapped, and how the medal survives a full season of wear. All eight options below are standard, and the choice is made together with the medal drawing — a fitting that does not match the medal's top loop or hole cannot be fixed after casting.

Snap clip

A small spring clip stitched into the ribbon end that snaps onto the medal's top loop. The fastest to assemble and the easiest to swap, which is why it is the default on race medals ordered in volume.

Split ring

A metal ring threaded through both the medal hole and the ribbon loop. The medal turns freely on the ring and the joint holds under weight — the usual choice for heavy zinc alloy medals.

Safety pin

The ribbon is sewn to a safety pin and pinned to a flat top plate. Simple, repairable in the field, and common on school and club awards.

Bulldog clip

A flat spring clip that grips a bar or a flat top. It holds a wide 38 mm ribbon without twisting, so it suits ceremonial and large-format medals.

Carabiner

A spring-gate clip that opens with one hand. The medal can be taken off the ribbon and clipped to a bag, belt or rack — practical on adventure races, cycling and obstacle events.

Swivel hook

A hook that rotates a full 360 degrees, so the ribbon cannot twist itself into a knot. Usually specified on corporate and premium recognition awards.

Sewn-in

The ribbon is folded and stitched directly through the medal slot or loop. No metal parts, the cleanest line where ribbon meets medal, and the ribbon is not removable.

Slot design

The slot is cast into the medal itself and the ribbon is threaded through it. Nothing is added to the medal, so the front stays clean and the medal sits tight against the chest.

Which attachment for which event

EventUsual choiceWhy
Marathon and finisher medalsSewn-in or slot designNo hardware on a medal worn for hours; the slot keeps the front clean
Large-volume race ordersSnap clipFastest to assemble and to replace on site
Charity and fun runsSnap clipLow cost per unit and easy to re-ribbon
Cycling, adventure and obstacle racesCarabinerDetaches and re-clips to a bag or bike
Corporate and premium awardsSwivel hook or split ringNo twisting, and the medal turns to face the camera
Schools and clubsSafety pin or snap clipSimple, repairable and budget-friendly
Military and ceremonialSplit ring or bulldog clipHolds a wide ribbon and a heavy medal

Every fitting is confirmed with your medal drawing. If a fitting needs extra hardware, we note it on your quotation.

Where Custom Ribbons Are Used

Races and Finisher Medals

Event colors, sponsor logos and the year printed on 25 mm satin, fitted to finisher medals and bagged for the finish line.

Schools and Clubs

House colors and club crests on 20–25 mm ribbons for sports days, prize givings and end-of-season awards.

Ceremonial and Military

38 mm grosgrain in ceremonial colourways, with woven crests and metal fittings, for formal presentation pieces.

Replacement and Top-Up Runs

Ribbons made to an existing medal when a club has medals in stock and needs fresh straps in the current season's colors.

Artwork Guidance for Printed Ribbons

Send vector artwork — AI, PDF, EPS, SVG or CDR with fonts outlined — laid out to the ribbon's finished width and length, and repeat the design along the ribbon if it is meant to read at any point. Three practical notes:

  • Repeat length: a repeating logo needs the repeat to divide exactly into the ribbon length, otherwise the last repeat is cut through.
  • Lettering: keep text at 5 mm cap height or larger on a 25 mm ribbon; below that the weave and the sheen break up the letters.
  • Color: send Pantone references, not RGB values. The ribbon is dyed and printed, and the medal enamel is matched to the same reference afterwards.

The proof shows the ribbon flat and printed, plus a simulated drop against the medal so the length and the position on the chest can be judged before production.

How to Order Custom Medal Ribbons

Send the artwork, the width, the length and the quantity to sales@sinoawards.com or via WhatsApp. If the ribbons go with medals, send the medal specification too so the attachment is specified with it.

  1. Choose fabric, width and attachment

    satin, grosgrain or RPET, 20/25/38 mm, and the fitting that matches the medal.

  2. Send the artwork and color references

    vector file with fonts outlined, and Pantone numbers for the ribbon and the enamel.

  3. Review the proof

    print position, repeat length, color and simulated neck drop.

  4. Print, cut and fit

    printing, heat cutting and sealing, attachment stitching and fitting to the medals.

  5. Packing and shipping

    bagged with the medals or supplied loose, shipped by air express or sea freight.

Packaging and Shipping

Ribbons for an event normally ship fitted to the medals and individually bagged, so the finish line is a case of handing over a bag rather than threading 500 straps. Loose ribbons are supplied in bundles by width and color, with the clips already stitched in. Ribbons are light and compress well, so they add very little to the freight of a medal order.

They can travel in the same carton as the medals, the bibs, the lanyards and the drawstring bags, and on the same invoice — which is the practical reason to buy the kit from one supplier rather than assembling it from four.

Why Order Ribbons From Sinoawards

The ribbon and the medal only look like one object if the color matches and the fittings meet. Both are made here: the medal is cast, plated and enamelled in our own factory, the ribbon is dyed and printed to the same Pantone reference, and the two are fitted and packed together before shipping. On a race kit that runs to thousands of pieces, that removes the most common failure — medals that arrive with a strap that is one shade off the event color.

OEM and ODM work is available for event agencies, distributors and brands that resell the full kit under their own label.

Related Products

Frequently Asked Questions

What is the difference between a medal ribbon and a lanyard?

A medal ribbon is the neck ribbon the medal hangs from: usually 20–38 mm wide satin or grosgrain, cut to a fixed length with a clip, ring or pin at the bottom that holds the medal. A lanyard is a longer, narrower strap worn around the neck to carry a badge, card or keys, and is normally fitted with a swivel hook or a card holder. Both are printed the same way, but the ribbon is chosen to match the medal and the lanyard is chosen to carry something.

How is the ribbon fixed to the medal?

Eight standard ways: a snap clip stitched into the ribbon end, a split ring threaded through the ribbon loop, a safety pin sewn into the ribbon, a bulldog clip for flat-top medals, a carabiner, a swivel hook that rotates 360 degrees, a sewn-in ribbon, or a slot cast into the medal with the ribbon threaded through it. The medal is designed with the matching top fitting — a loop for a clip, a hole for a ring — so the two parts should be specified together.

Which ribbon attachment should I choose?

It depends on how the medal will be worn. For a finisher medal worn for hours, a sewn-in ribbon or a slot cast into the medal keeps the front clean. For large race orders, a snap clip is the fastest to assemble and to replace. For cycling and obstacle events, a carabiner lets the medal be clipped to a bag. Tell us the event and the medal size and we will recommend one fitting.

Can the ribbon be swapped later?

Yes, if the medal is fitted with a snap clip, split ring, swivel hook or carabiner — the ribbon can be replaced without touching the medal. A sewn-in ribbon or a slot design is permanent: the ribbon is fixed to the medal and cannot be exchanged. If you expect to re-ribbon the same medals for a second event, choose a clip fitting.

Does a slot design change the medal?

Yes. The slot is part of the mold, so it has to be decided before the tooling is made, and it cannot be added to a medal that has already been cast. It removes the metal loop from the front and gives the cleanest finish, so it is normally specified on premium finisher medals.

Can the ribbon be printed with our logo?

Yes. Sublimation printing is the usual route: the artwork is printed into the satin so the ribbon keeps its sheen and the print does not crack. Woven jacquard is used when the logo should be part of the weave — it is more durable and gives a flatter, textile look. Screen printing is the most economical route for one or two solid colors on a short run.

How do you match the ribbon color to the medal?

The ribbon is dyed to a Pantone reference agreed at proof stage, and the same reference is used for the medal's enamel, the bag print and the bib. On multi-color event kits this is the part that goes wrong most often between suppliers, so one reference is held for the whole order and the proof shows the ribbon against the enamel swatch.

What widths and lengths do you make?

20 mm, 25 mm and 38 mm are the standard widths: 20 mm for children's events and small medals, 25 mm for most sports and finisher medals, 38 mm for large medals and ceremonial wear. Finished neck length is usually 800–900 mm depending on the medal's drop, and the length is confirmed with the proof so the medal sits at the right height on the chest.

Is a recycled ribbon available?

Yes — RPET satin is available instead of standard polyester satin, made from recycled PET. It prints and dyes the same way, so the artwork, widths and attachments do not change. The recycled content is confirmed per order in writing on the quotation.

Can the ribbons be supplied already fitted to the medals?

Yes, and for most event orders that is how they ship: medals and ribbons arrive fitted, bagged and sorted so nothing has to be assembled at the venue. If the medals are being made elsewhere, ribbons can be supplied loose with the clips already stitched in.

What is the minimum order for custom ribbons?

Minimums are quoted per order because they depend on the printing method and the number of colors; a printed satin ribbon and a woven jacquard ribbon do not share the same minimum. Send the quantity, width and artwork and the quotation states the minimum for that specification.

Get a Quote for Medal Ribbons

Send the artwork, the width, the length and the quantity for a quote and proof. If the ribbons go with medals, send the medal specification so the clip and the color are specified together.

Request a Quote See Custom Medals